JUNOS : MPLS L2 VPN

 

MPLS (Multiprotocol Label Switching) is a technique used in computer networks to forward data packets at the layer 2 (data link layer) or layer 3 (network layer) of the OSI model. It is commonly used to provide efficient and scalable forwarding of network traffic.

Junos is the operating system used by Juniper Networks devices, such as routers and switches. Junos supports MPLS and provides various features and configuration options for MPLS networks.

When it comes to MPLS at the layer 2 in Junos, it refers to MPLS Layer 2 VPN (Virtual Private Network). MPLS Layer 2 VPN allows service providers to extend layer 2 connectivity between customer sites over a provider's MPLS network.

Here are some key concepts and components related to MPLS Layer 2 VPN in Junos:

1. Virtual Private LAN Service (VPLS): VPLS is a technology used to provide a multipoint Ethernet service over an MPLS network. It allows multiple customer sites to appear as if they are connected to a single LAN.

2. Bridge Domains: Bridge domains are used to define Layer 2 segments within a VPLS network. Each bridge domain represents a separate Ethernet broadcast domain.

3. Virtual Switches: Virtual switches, also known as VPLS instances, are used to create VPLS instances in Junos. Each VPLS instance represents a separate VPLS network.

4. Pseudowires: Pseudowires are used to establish point-to-point connections over an MPLS network. In the context of MPLS Layer 2 VPN, pseudowires are used to carry Layer 2 traffic between customer sites.

5. VPLS Configuration: Configuring MPLS Layer 2 VPN involves defining VPLS instances, specifying bridge domains, configuring pseudowires, and defining the interfaces associated with each VPLS instance.

6. Routing Instances: Routing instances are used to isolate and control the routing and forwarding behavior within a VPLS network. Each VPLS instance typically has its own routing instance.

These are some basic concepts related to MPLS Layer 2 VPN in Junos. Configuring and managing MPLS Layer 2 VPN involves more detailed configuration steps and considerations, which may vary based on the specific Juniper device model and software version you are using.