SRX Series Services Gateways
| Platform | JTAC Recommended Junos Software by Platform | Release Type | Last updated |
|---|---|---|---|
| SRX100B/H | Junos 11.4R10.3 | Standard | 08 Jan 2014 |
| SRX100H2 (*1) | Junos 12.1X44-D30.4 | Standard | 03 Feb 2014 |
| SRX110H | Junos 11.4R10.3 | Standard | 28 Jan 2014 |
| SRX110H2 | Junos 12.1X44-D30.4 | Standard | 03 Feb 2014 |
| SRX210B/H/BE/HE | Junos 11.4R10.3 | Standard | 08 Jan 2014 |
| SRX210H2 | Junos 12.1X44-D30.4 | Standard | 03 Feb 2014 |
| SRX220H | Junos 11.4R10.3 | Standard | 08 Jan 2014 |
| SRX220H2 | Junos 12.1X44-D30.4 | Standard | 03 Feb 2014 |
| SRX240B/H/B2/H2 | Junos 11.4R10.3 | Standard | 08 Jan 2014 |
| SRX550 | Junos 12.1X44-D30.4 | Standard | 03 Feb 2014 |
| SRX650 | Junos 11.4R10.3 | Standard | 08 Jan 2014 |
| SRX1400 (*2, 3) | Junos 11.4R10.4 | Standard | 08 Jan 2014 |
| SRX1400 w/NP-IOC (*2, 3) | Junos 12.1X44-D30.4 | Standard | 04 Feb 2014 |
| SRX3400 (*3) | Junos 11.4R10.4 | Standard | 08 Jan 2014 |
| SRX3400 w/NP-IOC (*3) | Junos 12.1X44-D30.4 | Standard | 04 Feb 2014 |
| SRX3600 (*3) | Junos 11.4R10.4 | Standard | 08 Jan 2014 |
| SRX3600 w/NP-IOC (*3) | Junos 12.1X44-D30.4 | Standard | 04 Feb 2014 |
| SRX5400 | Junos 12.1X46-D10.2 | Standard | 08 Jan 2014 |
| SRX5600 | Junos 11.4R10.3 | Standard | 08 Jan 2014 |
| SRX5600 w/NG-SPC (*4) | Junos 12.1X44-D30.4 | Standard | 03 Feb 2014 |
| SRX5800 | Junos 11.4R10.3 | Standard | 08 Jan 2014 |
| SRX5800 w/NG-SPC (*4) | Junos 12.1X44-D30.4 | Standard | 03 Feb 2014 |
Note:
(*1) TSB16272 - U-Boot upgrade recommendation for SRX100H2
(*2) SRX 1400 deployment as a Chassis Cluster requires Junos 11.1 or above
(*3) TSB16273 - Junos software limitation for SRX1400/SRX3400/SRX3600 Routing Engine and SRX3K Switch Fabric Board
(*4) TSB16197 - Intermittent PHY or MAC layer link failure on SRX5600 and SRX5800 with SRX5K-SPC-4-15-320
My Juniper SRX380 suddenly goes dark, and upon rebooting, I keep encountering the following errors:
ReplyDeleteTimecounter "mips" frequency 1500000000 Hz quality 0
ad0: 95396MB at ata0-master UDMA133 SATA 3Gb/s
WARNING: Expected rawoffset 187667424, found 187667392
random: unblocking device.
hwpmc: OCTEON/4/64/0x1ff
Trying to mount root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
cpuid = 0
ADDRESS_ERR: pid 1 (preinit), uid 0: pc 0x4000e0 got a write fault at 0xfffccab0
Trapframe Register Dump:
zero: 0000000000000000 at: 0000000000000000 v0: fffffffffffccab0 v1: 00000000
When I try a clean install from USB, I get the following errors:
can't load '/kernel'
can't load '/kernel.old'
please propose me solutions.