Symptoms:
Solution:
Important Notes:
- Self-service RMA license transfer is available only where a Juniper RMA has been initiated by JTAC.
- There is no option for self-service license transfer for the following conditions:
- Customer/Partner Self-Sparing where no Juniper RMA # has been created
- Juniper Advanced Thread Protection (JATP) appliance
- EX-XRE200 Virtual Chassis license transfer
If your request falls into one of these conditions, contact Customer Care.
Follow the relevant self-service instructions below for your product, which depends on whether it is running Junos or non-Junos:
Junos OS Enabled Products (e.g. SRX Series, QFX Series, Ex Series)
Note: For MX Series, no license transfer is required following RMA. You may continue to use the same license unlocking key or trust-based Software 'Right to Use' on your replacement product. If you have misplaced your MX Series unlocking key or Software 'Right to Use' document, then contact Customer Care with your Purchase Order details.
Step 1: Gather the RMA number and device serial numbers:
- RMA Number (e.g. R299218954)
- Defective Device Serial Number
- Replacement Device Serial Number*
Tip: This information is located via the Technical Service Request or the RMA's module in MyJuniper Service Request Manager (MYJ-SRM).
*The
Replacement Device Serial Number may be one provided by Juniper
Networks or a product of the same model provided from either a Juniper
Partner or spare stock. When deploying your own spare, please ensure
that you contact Customer Care so that support entitlement and product registration information may also be updated!
Step 2: Activate the replacement licenses using the RMA Tool:
- Enter the Juniper Agile Licensing Portal (JAL).
- Click the RMA Tool button in the right-hand side of the screen.
- Enter the RMA details gathered in Step 1.
- Click the Submit button.
- Validate that the product information is correct and complete the RMA license transfer.
- The completion screen will be displayed where you may download/email the license keys.
If an error message is received or you are unable to transfer the license keys via self-service, contact Customer Care.
Tip: For additional instructions on RMA license transfer for Junos OS enabled products, refer to Juniper Agile Licensing Portal FAQ.
Step 3: Install the activated licenses on the replacement Juniper device.
For detailed instructions on Junos OS license key installation, consult: Adding New Licenses (CLI Procedure).
Non-Junos OS Products (e.g. SSG Series, JSA Series, Junos Space)
Note: As specified in the important note above, for RMA license key transfer on Juniper Advanced Threat Protection (JATP Series), contact Customer Care.
Step 1: Gather the RMA number and Device Serial Numbers:
- RMA Number (e.g. R299218954)
- Defective Device Serial Number
- Replacement Device Serial Number*
* The
Replacement Device Serial Number may be one provided by Juniper
Networks or a product of the same model provided from either a Juniper
Partner or spare stock. When deploying your own spare, please ensure
that you contact Customer Care so that support entitlement and product registration information may also be updated!
Step 2: Generate replacement licenses using the RMA Tool.
- Access the License Management System (LMS).
- Select Generate Replacement Licenses for RMA devices (below the drop-down list on the Generate Licenses tab).
- Select your product series from the list.
- Enter the RMA details gathered in Step 1.
- Click the Generate button.
- Confirm the RMA license transfer details and click Generate License.
- The completion screen will be displayed where you may download/email the license keys.
If an error message is received or you are unable to transfer the license keys via self-service, contact Customer Care.
Step 3: Install the generated licenses on the Juniper device.
- For ScreenOS firewall devices, refer to KB3731 - [ScreenOS] How does the firewall download subscription keys from the entitlement server?
- For Junos Space, consult: Generating and Uploading the Junos Space License Key File
